Smart TPMS External Sensor:
Smart TPMS Internal Sensor:
Installation position shown below :
Picture of installation external sensor:
please make sure receiver is open when installing sensor .data could be sent to receiver immediately once sensor installed.
4.1 . Please read user manual carefully
4.2 . Please prepare corresponding sensor and anti-thief nut
4.3 . Take off cap of valve , make sure the top of valve is smooth , no break ( or there will be leakage
4.4 . Screw anti-thief nut by clockwise
4.5 . Install corresponding sensor by clockwise ( don’t force it too hard to damage sensor
4.6 . Check leakage by using foam , ensure no leakage
4.7 . Tighten anti-thief nut by wrench with reverse , make sure anti-thief nut is close to external sensor fix sensor by left hand , wrench moderately force by right hand
4.8 . Installation other sensors by same method
Parameter of exter sensor
Picture of installation internal sensor
Parameter of internal sensor
Contact: Windstone
Phone: +86-13760104520
Tel: +86-755-84165968
Fax:+86-755-84165398
Skype1: ellentao901
Skype2: icelandoo
E-mail: sales@windstone.cn
Add: East 4th Floor, A7 Building, Xiufeng Industry City, Ganli Road, Jihua Street ,Longgang,Shenzhen City, Guangdong Province,China.